The Larini decat and club sport exhaust serves two purposes on project Lotus Elise. For starters, this combo along with the rear panel delete can easily yield weight reduction values approaching 25 lbs. The other purpose is to wake up the exhaust on the Elise because frankly, a car like this needs to be heard. Now what you won’t hear me talking about is power gains because the Lotus...
This guide is a prerequisite for many of the Lotus tutorials on this site. Placing the Lotus Elise on jack stands is a little trickier than most production cars. Due to the Elise’s design and flat underbody there are really only 8 designated “safe” lift points. Also, since the Elise has an extremely stiff chassis, I have found that a “stepping” method is the safest procedure to place the...
Changing the oil in the Lotus Elise is a relatively simple proceedure but first you will have to remove the rear undertray. Also, you can skip to the bottom for my recommendations on oil type and change intervals. Tools and Supplies 4 quarts oil (I use Mobil 1 15w-50) Oil filter (K&N HP1003 or HP2009) Filter wrench or 25mm socket for K&N 12mm wrench Oil drain pan Funnel Rags for cleanup...
The Lotus Elise is one of the few production cars that comes with a full body undertray. So when you look under the Elise, instead of seeing exposed lines and pipes (fuel/coolant/brake/exhaust) what you are met with is a flat sheet that runs the length of the car. This design feature is a blessing for aerodymics as it smooths and speeds the flow of air underneath the car. However, parts of the...
Chris Simmons is a race car driver, instructor, business owner and all around gearhead. His passion for motorsport started in the drifting community and progressed into wheel to wheel racing of all kinds. When off track Chris can be found training and working on a myriad of projects. After a hiatus from writing, he is back to share his passion, knowledge and experience in regard to motorsports on and off the track.